Easy Inquiries with Wi.Tec

Gas measurements are a complex matter. For your inquiry, please use our super simple application questionnaire or send us an informal email to get in touch with us quickly.


AdobeStock 433400747

Gas Insulated Switchgear Monitoring

  • Detection limit (3 sigma) < 0,1 Vol.% 
  • Linearity error < 0,5 % FS (Fullscale) 
  • Including Temperature-compensation 5 - 45 °C 
  • Including pressure compensation 600 - 1200 mbar 
  • Ready to use module 
INFRA.sens® AK2/μP compact // INFRA.sens® AK20G compact  To save the atmosphere – for quality and leakage measurement In gas-insulated high- and medium-voltage switchgear, sulfur hexafluride (SF6) is used as an …
Read MoreGas Insulated Switchgear Monitoring
TOC Analysis

TOC Analysis

  • One channel output for 0-30 Vol.% with accuracy of < 1 ppm (accuracy)
  • 2 sample cell version for different gas path available with only one module
  • Data rate of 100 ms possible
INFRA.sens® AK250G compact  For a better environment – one module all ranges Water occurs in the most varied of qualities in our environment. As a rough differentiation, drinking water, waste …
Read MoreTOC Analysis
Elemental Analysis

Elemental Analysis

  • Area saving solution for 2 gases with best technology selection (NDUV & NDIR)
  • Data rate of 100ms possible
  • Correction algorithm for SO2 to CO2 and vice versa
  • Long lifetime of radiation source
  • SO2 measurement possible with NDIR as well as NDUV
ULTRA.sens® AK100 // INFRA.sens® AK250G compact  High precision leads to higher quality  In chemistry, the term quantitative elemental analysis is used to describe the quantitative determination of the elements carbon …
Read MoreElemental Analysis
Automotive exhaust gas analysis

Automotive exhaust gas analysis

  • For high carbon monoxide ranges additional gas filter for suppression of interfering gases are integrated 
  • Low N2O measurement without CO2 interference powered by software algorithm 
INFRA.sens® N2O / CH4 / CO2-AK220G/AK5 // INFRA.sens® N2O / CH4 / CO2-AK250G/AK5  Low emission means low ranges  Combustion engines emit a large number of gaseous substances that must be …
Read MoreAutomotive exhaust gas analysis
Continous Emission Monitoring (CEM)

Continous Emission Monitoring (CEM)

  • Solution for stationary, mobile and maritime analyzer
  • Vibration tested according to DIN EN60068-2-64(04/2009)
ULTRA.sens® NOx / SO2-AK100 TBH  Environmental Monitoring must not be expensive  In combustion processes, for the generation of electrical energy and heat, a variety of gaseous components are produced, such …
Read MoreContinous Emission Monitoring (CEM)
Renewable Gas Monitoring

Renewable Gas Monitoring

  • Wide range of solution in the area of renewable energy sources and infrastructure
  • Development in progress for a new kind of portable H2S detektor
INFRA.sens® AK20Gcompact & ULTRA.sens® H2S Modul Measure the future energy sources  Biogas is produced by fermentation of organic waste and renewable resources (NAWAROS). The main components of biogas are methane …
Read MoreRenewable Gas Monitoring
Natural Gas Monitoring

Natural Gas Monitoring 

  • Low power consumption (< 10 Watt) 
  • Small size (28 cm x 20 cm x 10 cm) 
  • Fast response time (t90 = 10 sec.) 
  • No complex calibrations required 
  • Temperature and pressure compensated gas measurements 
  • Designed for high pressure range up to 15 bar 
NGM 1000 Selective measurement in complex gas mixtures  The analysis of natural gas has recently become increasingly important. Since energy flows currently come from a variety of sources, this has …
Read MoreNatural Gas Monitoring 
Customer Specific Projects

Customer Specific Projects

  • You have a measurement task that goes beyond the usual standards and are looking for a competent partner?
  • Please contact us. Your measurement task is our challenge!
  • The employees of Wi.Tec-Sensorik GmbH have extensive expertise in the field of industrial gas measurement technology and sensor signal processing.
Read MoreCustomer Specific Projects
Humidity Measurement

Humidity Measurement 

  • Detection limit: < 5 ppm H2O
  • Fast response time (t90 < 10 sec)
  • Efficient alternative for a dew point mirror measurement
  • Low maintenance operation
  • Can be combined with other gas measurements such as CO2, CO, CnHm, CH4 etc.
INFRA.sens® CO2 / HC / H2O – AK250GC / TBH piped  Compact alternative to laser and dew point mirror sensors  Humidity measurement is an important component of gas measurement technology, …
Read MoreHumidity Measurement