INFRA.sens AK250 TBH CO CO2 • Wi.Tec-Sensorik

Gases:

CO
CO₂

Table of Contents

1 Applications
2 Options
3 Features & Benefits
4 Technical Drawing (Dimensions)
5 Technical Data
6 Service & Support
7 Associated Downloads

Applications

Options

Features & Benefits

Low detection limit CO without CO₂ interference
Temperature controlled at 50°C
Low drift
Internal pressure compensated
Different interfaces (RS232, CAN-Bus,Analog
MARS-Tool (Datalogger and Controlsoftware)

Technical Drawing (Dimensions)

Technical Data

General features^*
Measurement principle	Non-dispersive infrared (NDIR); dual beam; 3 wavelenghts including reference path
Measurement range	Channel 1 – CO @ 500 ppm Channel 2 – CO₂ @ 20 Vol.%
Gas flow	0.1 – 1.5 l /min
Dimensions	345 mm x 153 mm x 103 mm
Weight	approx. 1510 g
Tube connector	4/6 mm tube
Lifetime of IR radiation source	> 40 000 h

F.S. full scale ¹ related to Pa = 1020 hPa ; Ta = 25 °C ; flow = 1l /min

Measuring response^*
Warm-up time	< 45 min ³
Response time (t₉₀)	< 5 s
Detection limit (3·σ)	CO : 2 ppm CO₂ : 0.002 Vol.%
Linearity error	CO : < 5 ppm CO₂ : 0.05 Vol.%
Repeatibility	CO : 3 ppm CO₂ : 0.1% Vol.%
Long term stability (zero)	CO : < ± 5 ppm /1000 hour CO₂ : < ± 0.1 Vol.% /1000 hour
Long term stability (span)	CO : < ± 10 ppm /1000 hour CO₂ : < ± 0.2 Vol.% /1000 hour
Temp. Influence zero	< 0.2 %F.S. /10K
Temp. Influence span	< 0.4 %F.S. /10K
Cross sensitivity	CO @ 500 ppm ⇒ CO₂ : < 5 ppm CO₂ @ 20 Vol.% ⇒ CO : < 0,01 Vol.%
Pressure influence	< 0.01 % /10hPa of reading

² full specification, demands to environmental conditions // ³ depends on digital filter settings // ⁴ at zero point with N₂ // ⁵ to each calibrated gas channel, other gases on request // ⁶ with pressure compensation

Electrical inputs and outputs
Supply voltage	24 (15 – 30) VDC
Supply current (peak)	< 1.2 A
Power consumption (average)	< 10 W
Digital output signal	RS 232 (ASCII) or CAN-Bus

Climatic conditions
Operating temperature^*	5 – 45 °C ⁷
Storage temperature	- 20 – 60 °C
Air pressure	300 – 1200 hPa (mbar)
Ambient humidity	0 – 95 % rel. humidity (not condensing)