Skip to content
- DN 04/06; 1 bar, 10 m
- (Viton hose)
- On request you will always receive the matching cables to your module for immediate integration into your system.
- Also we offer CAN dongle for CANbus communication.
- Pump head PVDF
- Diaphragm PTFE
- Valves and seal FFKM
- Brush motor, 24 V DC, 2-wire
- Gas flow rate 0 - 8 l/min
- Hose connection 4 / 6 mm
- 4/6mm tube connector
- Flowrate 0-4 l/min
- Small volume of 110cm3
- Pressure drop @ 1l/min less 6mbar
- coming soon
- Modbus RTU
- Baudrate 115200
- RJ45 connector
- Additional RS232 interface
- For thermal insulation
- Temperature controlled up to 55°C
- Optionally ULTRA.sens® or INFRA.sens®
- With dust filter
- Temperature range 5°C - 40°C
Read More
- Wi.Tec extension module for ULTRA.sens® INFRA.sens® & KOMBI.sens® series
- automatic zero-point adjustment for long-term stable measurements
- P.sens included (pressure compensation)
- especially for emission monitoring (CEM)
- Typ VV - switching on zero gas, e.g N2
- Typ VP - suction of ambient air
- Wi.Tec extension module for ULTRA.sens® INFRA.sens® & KOMBI.sens® series
- automatic zero-point adjustment for long-term stable measurements
- P.sens included (pressure compensation)
- especially for emission monitoring (CEM)
- Typ VV - switching on zero gas, e.g N2
- Typ VP - suction of ambient air
- Measuring range:: 0-100Vol.-%, 0-25Vol.-%
- Response time (t90): 15s; (5s for automotive Version)
- Service life: approx. 5 years
- Electrochemical sensor
- gas tube connection 4/6mm
- Measuring range:: 0-100Vol.-%, 0-25Vol.-%
- Response time (t90): 15s; (5s for automotive Version)
- Service life: approx. 5 years
- Electrochemical sensor
- gas tube connection 4/6mm
- Meas. range: 300 - 1,200mbar
- Resolution: 0.1mbar
- Response time (t90): 1s
- Pressure compensation of the gas measured values
- Optional: stainless steel version
- Meas. range: 300 - 1,200mbar
- Resolution: 0.1mbar
- Response time (t90): 1s
- Pressure compensation of the gas measured values
- Optional: stainless steel version
- Measuring range: 0-100% RH
- Resolution: ±1 % RH
- Response time (t90): 12s
- Absolute Humidity in g/m3
- I2C protocol
- Polymer humidity sensor
- 0-10V; 0-5V; 0-2V
- 16bit resolution
- 1 second Update rate
- 4 parallel signal outputs
- 0-10V; 0-5V; 0-2V
- 16bit resolution
- 1 second Update rate
- 4 parallel signal outputs
