KOMBI.sens®

Kombi.sens®

is a combination of ULTRA.sens® and INFRA.sens® with common base electronics. With this unit, up to 3 gas components can be measured simultaneously. The base electronics can simultaneously supply IR and UV radiation sources. This system is an ideal platform for the detection of multi-component gas at different concentration ranges (vol% and ppm)

Applications

  • Elemental Analysis
  • Industrial Gas Analysis
  • Emission monitoring (CEM)
  • Laboratories
  • Biogas Research

Properties

  • Optimal adaptation to the measuring task
  • Combination of IR and UV technology
  • High accuracy
  • Low power consumption
  • Compact size

Analyze up to 4 different gases with one module

VersionLine 1Line 2Line 3Line 4Line 5 *Line 6 *Line 7 *
Single
Gas Module
1.1CO2 / CO / NO / N2O / CH4 / CnHm O2PH
1.2NO / NO2 / SO2 / H2S / O3 / CL2O2PH
Dual
Gas Module
2.1CO2 / CO / NO / N2O / CH4 / CnHm CO2 / CO / NO / N2O / CH4 / CnHm O2PH
2.2NO / NO2 / SO2 / H2S / O3 / CL2NO2 / SO2 / O3 / CL2O2PH
2.3CO2 / CO / NO / N2O / CH4 / CnHm NO2 / SO2 / O3 / CL2O2PH
Triple
Gas Module
3.1CO2 / CO / NO / N2O / CH4 / CnHm CO2 / CO / NO / N2O / CH4 / CnHm CO2 / CO / NO / N2O / CH4 / CnHm O2PH
3.2CO2 / CO / NO / N2O / CH4 / CnHm NO2 / SO2 / O3 / CL2NO2 / SO2 / O3 / CL2O2PH
3.3NO / NO2 / SO2O2PH

* optional

Modular sensor design

In order to be able to adapt gas analyses as flexibly as possible to individual measurement tasks, the individual components designed modularly. This resulted in a »modular system« in which the various photometric components such as detectors, emitters, measuring sample cell, etc. can be exchanged. Aluminium with bright gold coating and passivated stainless steel is used as the standard sample cell material. PEEK (polyetheretherketone) is also available for special applications.

With this sophisticated sensor design, customer-specific applications can also be realized without the need for a completely new development. The modularity makes replacement and maintenance considerably easier when servicing is required. Completely bonded gas sensors, on the other hand, can only be replaced as a complete unit and thus generate high follow-up costs (total cost of ownership) in case of maintenance.

Optionally, the different gas measurement modules can also be equipped with a pressure measurement (P.sens) oxygen measurement (O2.sens) or a humidity measurement (HUMI.sens).

List of measurement ranges

INFRA.sens® NDIRULTRA.sens® NDUVUVRAS
Measuring range *CO2CONOCH4CnHmN2OSO2NO2O3CL2H2SNO
100 Vol.-%
30 Vol.-%
10 Vol.-%
5 Vol.-%
1 Vol.-%
5.000 ppm
2.000 ppm
1.000 ppm
500 ppm**
100 ppm
50 ppm
10 ppm

* Full scale value (F.S.) / ** up to 300ppm

1 F.S. - Full scale value / 2 CEM = Continuous Emission Monitoring / 3 PEMS = Portable Emission Monitoring System

Subject to change without notice.

0 Comments

Leave a reply